Electrical Machine MCQs Part 08

71. In transformer the cylindrical winding with rectangular conductors is generally used for
a. low voltage winding
b. high voltage winding
c. tertiary voltage winding
d. any of the above

72. Cylindrical winding on transformers is generally not used beyond
a. 6 kV
b. 30 kV
c. 66 kV
d. 132 kV

73. The disadvantages of cylindrical winding is
a. increased eddy current loss
b. high copper loss
c. low mechanical strength
d. all of the above

74. For transformer laminations
a. hot rolled silicon steel is preferred
b. cold rolled silicon steel is preferred
c. grain oriented silicon steel is preferred
d. any of the above steel can be used

75. The percentage of silicon in the core steel is
a. 1 to 2 percent
b. 2 to 3 percent
c. 4 to 6 percent
d. 8 to 10 percent

76. The stacking factor will be least for
a. Square core
b. Cruciform core
c. Three stepped core
d. Four stepped core

77. In static transformers mechanical forces are produced due to
a. vibrations
b. gap between laminations
c. interaction of current flowing in the conductor and leakage flux around it
d. none of the above

78. The thickness of laminations of the core of a power transformer usually
a. 0.003 to 0.05 mm
b. 0.03 to 0.05 mm
c. 0.03 to 0.5 mm
d. 3 to 5 mm

79. Transformer actions requires a
a. short circuiting
b. increasing resistivity
c. reducing resistivity
d. all of the above

80. In an oil filled transformer , oil is provided for
a. Cooling
b. Insulation
c. Lubricating
d. Both cooling and insulation
e. Preventing accumulation of dust